Apeks XTX 50 with 5th Port Turret


SKU: Apeks-XTX50-With-5th-Port Category: Brand:


The Apeks XTX 50 with 5th Port Turret diving regulator kit has been developed, to offer another position for hose routing for technical divers. This hose position is preferred by some divers, with the 5th port running the inflator hose on the right post, and the back up regulator on the left post. This kit has been installed and tested, so you do not have to install it yourself.


The DST first stage uses a balanced diaphragm design for high performance that does not decline at depth or as cylinder pressure becomes low. The internal springs and parts protected against cold water by an environmental seal to help prevent ice crystals forming that could lead to a free flow in extreme cold conditions.


The XTX 50 is a compact second stage with inlet heat exchanger and full metal valve barrel for improved cold transfer efficiency. A venturi lever allows customised control over the air flow within the housing, directing toward the diaphragm for reduced risk of free flowing when not in use and toward the mouthpiece for maximum air flow. A inhalation control knob allows the diver to increase the breathing effort required to open the valve if required.

Additional information

Regulator Type

DIN, INT (Yoke)