Description
Aquatec CC-637 Scuba Pony Connector DIN
CC-637
The regulator first stage DIN connector is a male screw type, and instead of clamping on to the outside of the valve as does the yoke, it screws directly into the female DIN outlet of the valve. Have the Regulator changed to DIN, carry a Yoke adapter for DIN in your dive gear to allow you to use both the same day without having to switch out regulator sets.
Scuba Pony Connector, Dive Pony Connector, Diving Pony Connector
The CC-637 Pony bottle connector for DIN scuba valve outlet and regulator fittings are most widely used outside the U.S. We decided it is best to also have a pony setup as a DIN with a DIN regulator for it also. You can get a DIN valve to fit in a tank at any dive shop.The regulator first stage DIN connector is a male screw type, and instead of clamping on to the outside of the valve as does the yoke, it screws directly into the female DIN outlet of the valve. The sealing O-ring is held in the end of the regulator connector rather than in the face of the outlet. The CC-637 Pony bottle connector for DIN system, with its captured O-ring design, has proven to be very reliable for use with SCUBA. DIN outlets should be protected from dings. DIN connector is attached to the body of the regulator. The DIN connector does not separate from the valve, what happens is the regulator separates from the DIN connector.
Scuba Gear Technical Information:
- Pony buttle connector for DIN.
- 0.4 liter cylinder international type connector.
- ⊙ Diving Equipment OEM & ODM available.
- ⊙ Diving Equipment customization.
- ⊙ Manufactured by: Aquatec
Maintenance
- After each use, must be rinsed with fresh water.
Warranty Period
- From the purchase of one year from the date of the product warranty.
- Normal operating circumstances, the non-human damage, the company must ensure that free maintenance.
